Plastics pipes and fittings for industrial applications — Collection of data on combined chemical-resistance

This document collects available data on combined chemical resistance of thermoplastic materials typically used to manufacture piping components for industrial applications, against fluids over a range of temperatures.

The base thermoplastic materials covered by this classification are:

Polyethylene PE

NOTE 1 The PE considered in this document corresponds to PE-HD, with a minimum density value of 0,935 g/cm3 (e.g.: PE63, PE80, PE100, PE100-RC, PE-RT).

Polypropylene PP (PP-R and PP-RCT, PP-H, PP-B)

Polyvinyl chloride, unplasticized PVC-U

Polyvinyl chloride, chlorinated PVC-C

Polybutylene PB

Acrylonitrile/butadiene/styrene ABS

Polyvinylidene fluoride PVDF

NOTE 2 This document considers homopolymer PVDF.

Cross-linked polyethylene PE-X (PE-Xa, PE-Xb, PE-Xc)

Ethylene chloro trifluoro ethylene ECTFE

Polyamide, unplasticized PA-U (PA-U11, PA-U12)

NOTE 3 This document focuses on PA-U11 and PA-U12 only, as these long chained PA-U are standardized according to ISO 16486-1; short chained (e.g. PA 66) and plasticized PAs are not used for monolithic plastic piping components.

Polysulfone PSU

Perfluoralkoxy PFA

NOTE 4 Temperatures higher than 200°C can be applied after an evalua